This log is about a pretty standard 60 litre aquarium (which is approximately 16 US gallons or 13 imperial gallons). It is a standard shape: 60 cm long, by 30 cm deep, by 36 cm high (which is approximately 24 × 12 × 14 inches). For the purpose of setting up and running an aquarium, the specific manufacturer of the glass doesn’t matter.
The three most common materials used for aquaria are glass, plastic and acrylic. I prefer glass because it does not scratch as easily as cheap plastic aquaria and acrylic is used predominantly for oddly shaped or large aquaria.
For simplicity and because I prefer aquariums with a flat front and curved corners, I decided to go for the Arc Tank II kit by Arcadia. It is an all-in-one package which contains most of the equipment needed to start.
The glass is 5 mm thick, with a slight green tinge. The silicone is clear, and the joints are quite neat, so it is barely visible. The surround on the bottom is a thin and made of metallic grey plastic. The aquarium itself is suspended on the frame, about 3 mm from the surface, with all the weight being spread between the four corners. The cover glass is 3 mm acrylic, with a large cut-out for the light fitting on the back a smaller cut-out for feeding on the front. Due to the thinness of the acrylic, it does sag in the centre. The cover glass is quite loose and is very light, so if one is planning to keep fish which are known for attempts to get out, a new cover glass will be required.
Because the aquarium is suspended on a frame, a base mat should not be used. For the same reason, whatever is used for the aquarium stand should provide good support in the corners as it will weigh 70-80 kg when full of water and decor.
Overall, it is nicer than the average aquarium with a lid and looks neat.