First shopping list – the details

Following on from the first shopping list, here are the explanations for why the items on the first shopping list are needed and what to look out for.

  • Aquarium

    The best aquaria for beginners are long, rectangular ones as most beginners do not know which way the hobby will take them and these are the tanks which give the most stocking options. It is best to go for at least a 90×30×30 cm (3×1×1 ft) tank as anything shorter will restrict you even on many of the “popular” fish. 60×30×30 cm (2×1×1 ft) is the absolute smallest that I can recommend to any beginner as setups smaller than that will not tolerate mistakes. Taller aquaria will not allow you to keep any larger fish, nor (really) any more fish, but the extra water will result in more stable parameters. Tank height does matter for some fish, such as Pterophyllum spp. (angels) and Symphysodon spp. (discus), but they should have quite large tanks anyway (for most species starting from 150×60×60 cm (5×2×2 ft)), so are usually not kept by beginners. Tank width/depth (the front to back measurement) does not matter too much for tanks tanks under 120 cm (4 ft) as they are too small to keep any fish that are large enough to have trouble turning around in a standard 30 cm (1 ft) wide tank. Odd shaped tanks and ones with low surface areas should generally be avoided if one does not want an extra level of difficulty and more stocking restrictions, this includes cubes, hexagonal prisms, “picture frames”, bowls and tanks with artificially reduces areas such as the Fluval Edge.

  • Filter

    Usually, the filters that come with the aquarium kits are fine, but if you do not have one, then I recommend external filters. I prefer to use Fluval internal filters or Eheim external filters. If the filter has activated carbon inside it, then the activated carbon should be removed and replaced with a media that does not affect the water while providing a high surface area for bacteria, such as porous ceramic media or sponges.

  • Test kits for ammonia, nitrite, GH and KH (water hardness), nitrate and pH

    It is only worth spending one’s money on liquid test kits, or maybe digital ones, but the strips are usually very inaccurate and can give false positives and, more worryingly, false negatives.

  • Dechlorinator

    Your first dechlorinator should be one that claims to “deal” or “neutralise” chlorine, chloramine, ammonia and nitrite. These are usually about the same price as ones which only work on chlorine and chloramine and add an extra level of protection because one of the by-products of chloramine removal is ammonia, so if your water supply has chloramine, as many in Europe do, then using a more traditional dechlorinator would leave the new water with ammonia in it, which would make the water changes during cycling redundant. Also, tap water can contain both ammonia and nitrite, both of which are harmful to fish.

  • Household ammonia

    Any household ammonia that does not contain anything other than water will do. Apparently the test to see if it contains other things is to shake up the bottle and see if it produces foam: if it does not, then it is what you want, but if it does, then it contains other constituents. I have never tried this method as I have never seen ammonia that contains other cleaning agents or perfumes in it. In the UK it is possible to buy ammonia from Boots, in the USA from Ace Hardware and in Germany from eBay.

  • Tubing for water changes

    Anything that is clean will work, starting from filter tubing all the way to garden hoses. If you plan to refill the tank straight from the tap, then it is worth getting a short length of tubing and a longer one or a python system.

  • Bucket

    Useful for lugging around water and for acclimatising fish. The bucket needs to be a new one and must never be used for anything other than fishkeeping to avoid contamination and poisoning the fish.

  • Thermometer

    Alcohol and digital thermometers are the most accurate. Avoid liquid crystal thermometers as they measure the temperature of the room and glass, not the water.

  • Heater

    Almost any heater is fine, I prefer to use NeWatt heaters because they are ceramic, so are more difficult to break and are less likely to fail than a glass heater. A good heater should last you a very long time (my oldest working heater is probably around 15 years old), while a bad (normally cheap) heater can break very quickly (most of the “cheap” heaters that I have had have failed in under 5 years). If you use a glass heater, make sure you have a heater guard for it: this is a plastic cage that goes around the glass, preventing the fish from touching the hot heater and burning themselves. A heater guard will also reduce the risk of you or a large fish smashing the heater. As a very general rule of thumb, one should have approximately 1 watt of heater per litre in a well heated house. So for our 90×30×30 cm (3×1×1 ft) example tank, which is approximately 80 litres in volume, we need an 80 watt heater. Since most heaters come in 75 or 100 watts, I would chose the 75 watt heater if I knew that the room was always warm, or the 100 watt heater if I could not be sure that the room is always heated. Another option would be 2× 50 watt heaters.

  • Substrate

    Research the substrates and go for your final choice right from the start. I recommend sand from a garden centre because it is usually no different from aquarium sand, but is considerably cheaper, and allows for a much wider selection of stock.

  • Plain background

    I prefer black, but dark blue also works well. White is more difficult to pull off, and the printed backgrounds usually look just tacky. At the very least, a background will hide the equipment cables, and it can even make fish more bold.

Next time, I will be writing a post-cycle shopping list.